With Selective Call Rejection you can program your phone to block calls from your selected list of phone numbers. Those callers receive a prerecorded announcement that you are not receiving calls at this time and are terminated. Calls from other numbers are not blocked. You can change numbers on your list at any time.

To “turn on” Selective Call Rejection:

  1. Press *60 (On a rotary phone, dial 1160). Listen for an announcement telling you whether the feature is currently on or off. A prerecorded voice will then tell you how may (if any) numbers are currently stored in your rejection list.

  2. Follow the voice instructions and press 3 to turn the feature ON (if it is currently off), or turn the feature OFF (if it is currently on).

To add the last caller to your list:

Press #01# (On a rotary phone, dial 1201).

To add a number to your list:

Press # (On a rotary phone, dial 12). Follow voice instructions. You can store up to 32 phone numbers on your rejection list.

To remove a number from your list:

Press * (On a rotary phone, dial 11). Follow the voice instructions to remove any of the numbers from your list.

To remove all numbers from your list:

Press *08 (On a rotary phone, dial 1108).

To hear the phone numbers on your list:

Press 1. After the list is read, voice instructions will follow.

To hear instructions again:

Press 0.

Note:

  • This feature will not work with calls originating from an area or long distance carrier not providing Caller ID 

  • service, toll free numbers, some 700 and 900 numbers, international calls and some cellular calls.

  • You may press 1, 0, #, or *. (On a rotary phone, dial 1, 0, 12, or 11.) At any time rather than waiting for the voice instructions.

  • The list you create here is separate from any other lists you may be using for Selective Call Forwarding and similar services.

If you have additional questions please contact our service department at 855.330.1143.

Did this answer your question?